-
Bafang Nylon Gear BBS01 & BBS02Bafang Replacement Nylon Gear. Compatible with the older BBS01 and BBS02 Bafang mid drive conversion kits, not suitable with the newer BBS01B/BBS02B or BBSHD. We normally insist on replacing these parts in-house, given we need to provide warranty on them. Please speak to us...
- $54.00 AUD
- $54.00 AUD
- Unit price
- per
-
Bafang Nylon Gear BBS01B & BBS02BBafang Replacement Nylon Gear. Compatible with the newer version BBS01B and BBS02B Bafang mid drive conversion kits. Not suitable with the older BBS01/BBS02 or the BBSHD. We normally insist on replacing these parts in-house, given we need to provide warranty on them. Please speak...
- $54.00 AUD
- $54.00 AUD
- Unit price
- per
-
Plastic Gear SensorThis device will automatically cut out the motor when changing gears, to protect your drivetrain components. Suitable for the BBS and BBSHD systems. Included as standard in REV kits (we install the upgraded METAL units in our professional installations) Installed by threading the gear...
- $30.00 AUD
- $30.00 AUD
- Unit price
- per
-
DC - DC ConverterAllows you to convert 36v or 48v down to 5v (2 amps maximum), for special lights, phone charging, etc. Can use the included USB port, or cut that off to attach lights. DIY or Installation by REV Bikes. If you require installation - contact...
- From $45.00 AUD
- From $45.00 AUD
- Unit price
- per
-
Bafang Motor Bracket Set For BBSHD Mid-Drive MotorMotor Bracket set suitable for Bafang BBSHD Mid-Drive Motors Set consists of the following: 2 x Crank Arm Nuts 1 x Fixing Plate 1 x Lock Ring 1 x Lock Ring Cover 2 x Nuts For Fixing Plate
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Bafang Motor Bracket Set For BBS01/02B Mid-Drive MotorMotor Bracket set suitable for Bafang BBS01/02B Mid-Drive Motors Set consists of the following: 2 x Crank Arm Nuts 1 x Fixing Plate 1 x Lock Ring 1 x Lock Ring Cover 2 x Nuts For Fixing Plate 5 x Nuts for Chain Ring
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Bafang Main Loom cableMain Cable, from the motor controller up to the handlebars. Compatible with all the Bafang mid drive conversion kits.
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Bafang Mid drive installation toolThis tool can be used to install and uninstall the Bafang mid drive motors. Compatible with all Bafang mid drive motors- BBS01B, BBS02B and BBSHD motors. This tool fits the inner and outer lock rings of the motor, but you will need to GUESS...
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Bafang Lever-action ThrottleSwing Arm Throttle Right Side. Compatible with all the Bafang mid drive conversion kits. Designed to be used with road bike racing handlebars. Can be used with all other handlebars as well.Swing Arm Throttle Right Side. Sideways action throttle, similar angle to thumb tap...
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Lever throttle for our HUB systemsEngage the motor without pedalling, great for a standing start, or over-ride when in lower assist levels. This is the lever model, which looks and operates much like a gear shifting lever. It sits anywhere on the narrow parts of the handlebar, including curved...
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Half-twist throttle for our HUB systemsEngage the motor without pedalling, great for a standing start, or over-ride when in lower assist levels. Button engages CRUISE CONTROL on our systems, brake cutout will disengage. This half-twist model is designed to be mounted on the right hand side of the handlebar,...
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Mirrycle Bike 75mm MirrorThe Mirrycle Bar End Mirror is a 75mm diameter, fully adjustable rear vision bicycle mirror designed to mount inside the the end of the handlebar. The Mirrycle Bar-End Mirror is a famous rear-vision cycling mirror. Mounts in minutes with the wrench that is included....
- $45.00 AUD
- $45.00 AUD
- Unit price
- per
-
Suspension Seat PostSmooth the bumps out with this suspension seat post. Piston suspension to absorb the jolts when riding over uneven terrain. Available in 3 diameters; Polished chrome finish for 25.4mm (as pictured) / 27.2mm is gloss black / 30.9mm is gloss black
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Muc-Off Bio Drivetrain Cleaner 500mlThe Muc-Off Bio Drivetrain Cleaner is the complete drivetrain cleaning solution that can either be poured into a chain cleaning device or sprayed directly to your chain rings, rear cassettes and derailleurs to clean your entire drivetrain within seconds. It's also fully biodegradable and...
- $38.00 AUD
- $38.00 AUD
- Unit price
- per
-
Bafang internal PAS SensorBafang PAS Sensor. Replacement Pedal Assist Sensor. Suitable for all the Bafang mid drive kits. BBSHD, BBS01B and BBS02B We normally insist on replacing these parts in-house, given we need to provide warranty on them. Please speak to us if you need yours replaced,...
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
Bafang Crank Arms 152mmCrank arms 152mm BBSHD BBS01B BBS02B Bafang Mid Drive Conversion Kit Electric Bike. Suits all Bafang Mid Drive Conversion Kits. Smaller than the standard 170mm size crank arms.
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
Bafang Crank Arms 170mm1 Set of Standard Bafang Crank Arms. Includes left and right crank arm 170mm. Suitable for all the Bafang mid drive conversion kits
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
Bafang Speed Sensor with MagnetSpeed Sensor with Magnet. Suitable for all the Bafang mid drive conversion kits.
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
Clip-on Pedelec SensorMulti-magnet pedelec with clip-on sensor.
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
One-piece Pedelec SensorEasy to install one-piece pedelec sensor. Simply remove the crank arm and push it on! No need to fiddle with retaining rings!
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
Heavy duty bike lockKeeping your e-bike secure while out-and-about is paramount. A D-Lock is a great way to help deter thieves from making off with your bike. The D shaped mechanism allows you to latch your rear wheel and the frame to a secure point. It also...
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
Pro Series Dual Bottle CarrierThe Pro series dual bottle carrier attaches to the saddle rails at the back of the bike. A great solution for e-bikes with a frame mounted battery. Complete with fitting bracket and mounting bolts.
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
Velo Attune GripsVELO Attune 138mm MTB Mountain Bike Bicycle Handlebar grips which feature bar end ergonomic shape for added comfort and grip. Lock-On fitting for easier fitting and removal. Shock Absorbing Non-slip Black and Grey with Red highlights.
- $35.00 AUD
- $35.00 AUD
- Unit price
- per
-
KMC 6/7/8 Speed ChainKMC Chain suitable for 6 / 7 / 8 Speed bikes, compatible with Shimano and Sram. 116 link 1/2″ x 3/32″ KMC chain. Compatible with most bikes with cassettes up to 8 sprockets, Complete with a “missing link” system for easy fitting. Unless you...
- $40.00 AUD
- $40.00 AUD
- Unit price
- per
-
Bafang Y splitterThese cables enable 2 brakes levers and the gear sensor to be plugged in at the same time, by turning 2 yellow plugs on the loom into 3. Suitable for the standard brake levers, hydraulic brake sensors, and gear sensor. Compatible with the BBS01B...
- $32.00 AUD
- $32.00 AUD
- Unit price
- per
Subscribe To Our Newsletter
Get REV Electric Bike news first, exclusive promotions, and more delivered to your inbox.